11 Steps to Spray Paint Your Car Like the Professionals - Auto Bodywork Paint Repair

You will be surprised to see only how you can spray car paint really can be easy. That doesn't mean that you can just grab a tin of paint and go at it. There are some principles you must know. Both in application and the preparation.

Step A:

Prepare by gathering all of your items that you are going to need. Any parts that don't need to be sprayed and that can be removed afterward do so. For other areas cover nicely with paper and masking tape.

Step B:

You may have to analyze the car for any rough spots. These will have to be sanded with 300 grit sand paper. Additionally, it enables the aerosol car paint to adhere better. Once you have finished sanding, make sure all of the dust soil and debris are removed from the vehicle. It's imperative the car be absolutely clean.

Measure C:

You will need to apply a primer. This will make sure that you get an overall even coating of your coloured paint plus helps the paint to stick well. Be sure you allow for drying in between and apply light coats when you spray the primer. How to spray on auto paint takes a little getting used to.

Step D:

Now you are pretty well to the point where you're about ready to spray on the shade. You may have decided to use the spray car paint that comes in aerosol cans, or maybe you've selected for the spray gun. Before you start with the car either way, make a couple of practice strokes on an object. Once you happen to be ready, begin the passes with the paint without hesitation. You Alloy Wheel Refurb London may get uneven coverage, if you hold the spray can or gun in one place and potentially the paint will run. If it happens you have an important repair job on your had. You'll most likely have directions as to how you can spray on auto paint using the gear or spray cans.

Step E:

Check with someone that's familiar with the way to spray on car paint, or you may want to research this alternative on the internet

Step F:



You're down to the finishing touches, once you are totally satisfied with the shade. You will now want to apply several coatings that are clear. This can give the finished and polish appearance to the automobile as well as protect the finish. Likely two coats will be adequate but it will be up to you personally. Make absolutely certain it is dry in between coats.

Step G:

If you prefer once again, you have the choice of wet sanding. Again, I recommend you ask the advice of individuals which can be familiar with the way to spray paint a car. You need with the following grits in this order if you determine to follow this measure then. Use 800, 1000, 1200, 1500 and the ultimately the 2000. This will remove spots that may be overly heavy in the clear coat application.

Step H:

Step I:

You should now buff the surface. To try this just use a medium cut polish.

Step J:

As a final touch, you might want to apply a number of layers of wax.